Loading Profile...
Twitter,
Facebook, or email.
Time Shift
My radions "reset" their timing starting and stopping 1 hour earlier than the programmed times. I switched from "pc time" to set time and there was no difference: they still went on and off 1 hour early.
-
Bill,
Do you have the "Inherit Group Schedule" box checked on your light(s) in the software, and then making programming changes to the entire group? If not, try applying those changes to see if your light comes on/off as programmed by you.Comment -
-
I can't find the "Inherit Group Schedule" box in the software. The odd thing is that the lights were working on my schedule and then... they weren't. I hadn't made any changes or even connected them to the computer. I'll try plugging the usb cable in the other light today to see if it makes a difference. BTW the grouping/ungrouping method is confusing.
-
-
I found the "Inherit Group Schedule" box...the reason I didn't see it before was that after I select a group it disappears!
Anyway, it is checked.
I fooled around with the setup today and discovered that in Natural mode everything works as it should. I can change the end of day time and the lights respond after reprogramming.
Not so in artifical mode. The changes I make have no effect after reprogramming. So at this point artifical mode seems to be "busted"!
Any ideas?
Thanks, Bill -
EMPLOYEE
